Availability: | |
---|---|
Quantity: | |
MYDL404
BOEEP
MYDL
Overall Structure
BOEEP volute screw press separator is composed of screw body, driving device, filtrate receiver, mixing system and frame.
Strcture Principle
The main body of volute screw sludge dehydrator is made of multiple fixed annular plates and moveable annular plates with the screw shaft running through it. The front part is thickening department and the ending part is dewatering department. It can thicken and dewater sludge in one chamber and has taken place of the traditional filter clothes and centrifugal filtration method for its distinctive function.
Sludge will be transported to the dewatering part after being thckened in the thickening part. In the advancing progress, great pressure has been produced because of the gradually decreasing filter spacing and screw distance with the clogging of the back platen. Then the volume decreases continuously, and the purpose of fully dewatering will be achieved.
Applicatiton
Textile | Cooking wastewater/kitchen waste | Animal slaughter/animal butcher |
Petrochemical industry/oily sludge | Printing and dyeing | Brewery/wine process wastewater |
Animal husbandry/livestock industry/livestock breeding | Municipal wastewater/domestic wastewater/urban sewage treatment | Landfill leachate/refuse leachate/percolated fluid |
Biotechnology/bioengineering/biological engineering/bioengineering | Refuse processing plant/garbage proposal | Anaerobic digested sludge/aerobic sludge |
Paper making | Food industry | Pharmaceuticals industry/pharmacy |
Chemical wastewater | Industrial wastewater | Coal chemical industry |
Machining wastewater | Recycled water/reclaimed water | Eletroplating industry |
Water purification industry | Hospital sewage | Tobacco industry wastewater treatment |
Technical Parameters
Parameter | |
Type:MYDL404 | Dimension:L5160×W3160×H2100(mm) |
Solid content:10000~50000mg/L | Capacity:520-640kgds/h |
Power:8.2kw | Protection Level:IP55 F |
Power Supply:380V/3/50Hz | Output sludge moisture content:75-85% |
Polymer feeding rate:DS 0.2~1% | Flush water:320L/h |
Water supply pressure:≥0.2MPa | Equipment weight:7000kg |
Screw body | Flocculated mix tank |
Specification × Length:Φ400×3255(mm) | Dimension:L2650×W1200×H1400(mm) |
Quantity:4 | Volume:About 4400L |
Material:Plate: SUS304/ Screw Shaft: SUS304 | Material:SS304 |
Motor Power:1.5×4kW | Motor power:1.1x2kw |
Electrical Cabinet | |
1. Frequency converting controls dewatering body; | |
2. Controls polymer mixing device; | |
3. Realize the switch of automatic operation and manual operation. |
Model Selection
Product Details
Workshop
Object Site
Overall Structure
BOEEP volute screw press separator is composed of screw body, driving device, filtrate receiver, mixing system and frame.
Strcture Principle
The main body of volute screw sludge dehydrator is made of multiple fixed annular plates and moveable annular plates with the screw shaft running through it. The front part is thickening department and the ending part is dewatering department. It can thicken and dewater sludge in one chamber and has taken place of the traditional filter clothes and centrifugal filtration method for its distinctive function.
Sludge will be transported to the dewatering part after being thckened in the thickening part. In the advancing progress, great pressure has been produced because of the gradually decreasing filter spacing and screw distance with the clogging of the back platen. Then the volume decreases continuously, and the purpose of fully dewatering will be achieved.
Applicatiton
Textile | Cooking wastewater/kitchen waste | Animal slaughter/animal butcher |
Petrochemical industry/oily sludge | Printing and dyeing | Brewery/wine process wastewater |
Animal husbandry/livestock industry/livestock breeding | Municipal wastewater/domestic wastewater/urban sewage treatment | Landfill leachate/refuse leachate/percolated fluid |
Biotechnology/bioengineering/biological engineering/bioengineering | Refuse processing plant/garbage proposal | Anaerobic digested sludge/aerobic sludge |
Paper making | Food industry | Pharmaceuticals industry/pharmacy |
Chemical wastewater | Industrial wastewater | Coal chemical industry |
Machining wastewater | Recycled water/reclaimed water | Eletroplating industry |
Water purification industry | Hospital sewage | Tobacco industry wastewater treatment |
Technical Parameters
Parameter | |
Type:MYDL404 | Dimension:L5160×W3160×H2100(mm) |
Solid content:10000~50000mg/L | Capacity:520-640kgds/h |
Power:8.2kw | Protection Level:IP55 F |
Power Supply:380V/3/50Hz | Output sludge moisture content:75-85% |
Polymer feeding rate:DS 0.2~1% | Flush water:320L/h |
Water supply pressure:≥0.2MPa | Equipment weight:7000kg |
Screw body | Flocculated mix tank |
Specification × Length:Φ400×3255(mm) | Dimension:L2650×W1200×H1400(mm) |
Quantity:4 | Volume:About 4400L |
Material:Plate: SUS304/ Screw Shaft: SUS304 | Material:SS304 |
Motor Power:1.5×4kW | Motor power:1.1x2kw |
Electrical Cabinet | |
1. Frequency converting controls dewatering body; | |
2. Controls polymer mixing device; | |
3. Realize the switch of automatic operation and manual operation. |
Model Selection
Product Details
Workshop
Object Site