  Email: boe@boeep.com
Automatic Polymer Preparation Unit for Dosing System
You are here: Home » Products » Sludge Dewatering » Polymer Preparation Unit » Automatic Polymer Preparation Unit for Dosing System
Share to:

Automatic Polymer Preparation Unit for Dosing System

BOEEP automatic polymer preparation unit is to make the flocculant of powder or liquid dissolve or dilute into flocculants solution, then do the dosing work.
  • YTH1000
  • YTH

Product Introduction

The automatic dosing machine is widely used in the waste water treatment, it can mix the compounds continuously and effectively, so the reactive polymer solution appears.

Structure & Features

structure of polymer preparation unit

This main components of the machine : Polymer feed machine ( including material hopper), Dry powder infiltration device, Tank, Level controller,  Mixer, Dosage water inlet pipe, Electric control panel.

  • Polymer dosing device

    Polymer dosing device is composed of hopper, push screw, electric heater and etc. The effective volume of the hopper can meet the dosage for a long time which is equipped with sight glasses for observing material level monitored by the dry powder level meter. The push screw driven by the high-precision reducer can satisfy the dosage. The electric heater can installed in the discharge pipe of push screw, and it can prevent the powder from caking.

  • Polymer dissolving device

    Polymer dissolving device is composed of pre-soaking device, tank, and 3 sets of mixers. The pre-soaking device is to infiltrate and mix the polymer powder in advance. The 3 tanks are precast mixing tank, homogeneous slaking tank and solution storage tank, in which there is a mixer correspondly to guarantee the homogeneity.

  • Water supply device

    Water supply device is composed of pipeline, manual ball valve, filter, pressure gauge, solenoid valve, stop valve, and the rotor flow meter, etc.

Technical Parameter

Model:YTH1000 Polymer feed diameter:DN32
Polymer feed capacity:2-10kg/h Vent pipe diameter:DN32
Preparation capacity:1000L/h,curing time: 60min Overflow pipe:DN40
Dosing motor power:0.18KW Dosage water inlet flow:0.6-3 m³/h
Mixer motor power:0.75KW (380V,50Hz)×3 Inlet pressure:0.2-0.3MPa
Electric heating power:0.02KW Outline dimension:2000mm(L)×1000mm(B)×1710m(H)
Dosage water inlet diameter:DN32 Main power:2.45KW

Main Features

  • Full automatic operation including automatic dosing, dissolving and feeding.

  • The highly precise dry polymer dosing device and the well designed heater device can prevent the polymer from caking.

  • The dosage of dry powder and water can be adjustable, so the solution with any concentration can be prepared.

  • Optional: Vacuum feeding machine

  • Optional: on-line dilution system

  • Tank material: SS304 or SS316l, Polypopylene PP, FRP etc.

    features of polymer preparation unit

Technical Specification

technical specification of polymer preparation unit

Product Details

product details of polymer preparation unit

Object Site

Object Site of polymer preparation unit

Click Here For Inquiry!

BOEEP has over 20 years’ professional experience as a waste water treatment equipment manufacturer and engineering service enterprise.




Add:NO.10 Zhenye Road, Yangmiao, Hanjiang, Yangzhou, Jiangsu, China
E-mail :boe@boeep.com
Hand phone: +86-18252568555
QQ: 31609749
Copyright ©️ 2018 Jiangsu BOE Environmental Protection Technology CO., Ltd.  Designed by Leadong  / Site Map