  Email: boe@boeep.com
Product introduction of sludge hopper
You are here: Home » Knowledge » Sludge Dewatering Equipment » Product introduction of sludge hopper

Product introduction of sludge hopper

Product introduction of sludge hopper

The sludge hopper is a collection and storage device for the dewatered sludge cake after the dewatering equipment. The main body of the sludge hopper will be designed to resist bending stress through internal pressure. When the sludge reaches a certain amount, the valve at the bottom of the sludge hopper will be opened and the sludge cake will be discharged directly onto the truck. Next, let's take a look at the product introduction of the sludge hopper. Here are some answers.

Here is the content list:

What is the working principle of a sludge hopper?

What are the characteristics of a sludge hopper?

Choice of sludge hopper.

Installation of sludge hopper.

What is the working principle of a sludge hopper?

There area unit 2 jaws at very cheap of the sludge hopper. Two jaws controlled by an electric drive rod control the collection and discharge of sludge. There is a flat gate at the bottom of the sludge hopper. The sludge is collected and discharged by controlling this flat gate controlled by an electric drive motor.

What are the characteristics of sludge hopper?

First, the type of sludge hopper can be selected according to the project site. Second, the sludge hopper is equipped to store the sludge cake created by screw sludge dehydrator, belt filter press, centrifuge and plate, and frame filter press. Third, the main material of sludge hopper is carbon epoxy anticorrosive paint, SS304/316L.

Choice of sludge hopper.

A sludge hopper has a jaw door, a sludge hopper, and a sludge hopper. The jaw gate sludge hopper generally has a relatively large discharge port, and the jaw gate sludge hopper has a very good discharge effect. It is suitable for sludge with low water content and is perfectly matched with the plate and frame filter. The sealing performance of the flat gate sludge hopper is very good, regardless of the water content of the sludge, the flat gate sludge hopper is always suitable. All in all, the plate and frame filter press can be matched with the jaw door Sludge hopper, and the screw press dewatering machine and the pressurized sludge dewatering machine can be matched with the flat mouth sludge hopper.

Installation of sludge hopper.

There are unit 2 doors at very cheap of the sludge hopper, that collect and discharge sludge by dominant the 2 doors. The fan-shaped doors are controlled by air cylinders or electric pushrods. Generally, in the newly built sludge dewatering room, the dewatering machine is placed on the second floor, so the sludge hopper is fixed on the second floor. And the garbage truck can catch the sludge at the bottom of the sludge hopper, which is convenient for operation and maintenance. If the sludge hopper is placed on flat ground, the system is sometimes wont to raise the sludge hopper. The height and width of the scaffolding should be conducive to the in and out of the truck, and the sludge from the dewatering machine is sent into the sludge hopper by the shaftless screw conveyor.

Our official website is https://www.chinaboeep.com/. If you are engaged in work related to sludge hopper or want to learn more about our company, you can communicate with us on the website. We will wholeheartedly provide users with more and better services with high-quality products, good services, and competitive prices!


BOEEP has over 20 years’ professional experience as a waste water treatment equipment manufacturer and engineering service enterprise.

PRODUCTS

QUICK LINK

CONTACT US

Add:NO.10 Zhenye Road, Yangmiao, Hanjiang, Yangzhou, Jiangsu, China
Tel:+86-514-87848766
Fax:+86-514-87894600
E-mail :boe@boeep.com
Hand phone: +86-18252568555
QQ: 31609749
Skype/Wechat/Whatsapp:+86-18252568555
Copyright ©️ 2018 Jiangsu BOE Environmental Protection Technology CO., Ltd.  Designed by Leadong  / Site Map